Compare Models

2019 Yamaha Concierge 6 (Gas EFI)
2019 Yamaha Concierge 6 (Gas EFI)

Specs

General Information

Manufacturer
Yamaha
Yamaha
Model Year
2019
2019
Model
Concierge 6 (Gas EFI)
Concierge 6 (Gas EFI)
Model Code
DR2ASBK6P
DR2ASBK6P
Color
Onxy Metallic
Onxy Metallic

Engine

Engine

Yamaha-built, low-emission single cylinder 60° incline OHV

Cooling system - Forced Cooling

Yamaha-built, low-emission single cylinder 60° incline OHV

Cooling system - Forced Cooling

Displacement
357 cc
357 cc
Bore x Stroke
85 x 63 mm
85 x 63 mm
Compression Ratio
8:1
8:1
Carburetion
Fuel system - Electronic injection
Fuel system - Electronic injection
Ignition
Transistor
Transistor
Starter
Generator
Generator
Lubrication
Oil capacity - 1 qt. (1 l)
Oil capacity - 1 qt. (1 l)
Air Filter
Two-stage, urethane-foam pre-cleaner, and high-capacity pleated paper cartridge
Two-stage, urethane-foam pre-cleaner, and high-capacity pleated paper cartridge
Fuel Type
Gas
Gas

Measurements

Length
Overall - 161.4 in. (4,100 mm)
Overall - 161.4 in. (4,100 mm)
Height

Overall with suntop - 75.2 in. (1,910 mm)

Overall without suntop - 46.9 in. (1,190 mm)

Floor board height - 13.5 in. (342 mm)

Overall with suntop - 75.2 in. (1,910 mm)

Overall without suntop - 46.9 in. (1,190 mm)

Floor board height - 13.5 in. (342 mm)

Width
Overall - 47.2 in. (1,200 mm)
Overall - 47.2 in. (1,200 mm)
Weight
Dry - 1,010 lb. (458 kg)
Dry - 1,010 lb. (458 kg)
Wheelbase
131.4 in. (3,337 mm)
131.4 in. (3,337 mm)
Ground Clearance
Minimum - 4.3 in. (110 mm)
Minimum - 4.3 in. (110 mm)

Operational

Brakes
Self-adjusting 4-wheel mechanical drum
Self-adjusting 4-wheel mechanical drum
Suspension

Front - Tru-Trak II™ fully independent automotive-style strut

Rear - Unit swing arm with coil springs over hydraulic shock absorbers

Front - Tru-Trak II™ fully independent automotive-style strut

Rear - Unit swing arm with coil springs over hydraulic shock absorbers

Tires

Front wheel tread - 34.3 in. (870 mm)

Rear wheel tread - 38.6 in. (980 mm)

Front wheel tread - 34.3 in. (870 mm)

Rear wheel tread - 38.6 in. (980 mm)

Seating

Capacity - 6 persons

Seamless, fabric-backed vinyl bonded to pure, virgin foam contoured seat cushions and matted to a warp and moisture-resistant polypropylene bottom strengthened with plated steel inserts

Capacity - 6 persons

Seamless, fabric-backed vinyl bonded to pure, virgin foam contoured seat cushions and matted to a warp and moisture-resistant polypropylene bottom strengthened with plated steel inserts

Turning Radius
Minimum - 14.4 ft. (4.4 m)
Minimum - 14.4 ft. (4.4 m)
Steering
Self-compensating double reduction helical rack-and-pinion, permanently lubricated with sealed, greaseless tie-rod ends
Self-compensating double reduction helical rack-and-pinion, permanently lubricated with sealed, greaseless tie-rod ends
Speed
Maximum forward / Reverse - 19 mph (31 km/h)
Maximum forward / Reverse - 19 mph (31 km/h)

Other

Additional Colors

Glacier

Bluestone Metallic

Jasper Metallic

Moonstone Metallic

Onyx Metallic

Sandstone Metallic

Rich Brown Metallic

Aqua Blue Metallic

Glacier

Bluestone Metallic

Jasper Metallic

Moonstone Metallic

Onyx Metallic

Sandstone Metallic

Rich Brown Metallic

Aqua Blue Metallic

Frame
HybriCore™ Chassis features a robotically welded automotive ladder-style frame mated to a polypropylene structural floor. Frame components are protected with a multi-step phosphate treatment, electro-deposition epoxy-based coating, and an electrostatically applied polyester/urethane powder topcoat
HybriCore™ Chassis features a robotically welded automotive ladder-style frame mated to a polypropylene structural floor. Frame components are protected with a multi-step phosphate treatment, electro-deposition epoxy-based coating, and an electrostatically applied polyester/urethane powder topcoat
Warranty
Standard 2-year limited
Standard 2-year limited

Features